home | info | tutorials | sponsors | support | links | contact

How to Replace the Fuel Filter
1990-1994 Lexus LS400

Pictures by Thuan (LOC Member 92Lex), Text by LexLS.com

Before doing anything read my disclaimer & safety info.

 

Notes

The fuel filter is located in front of the driver's side rear wheel. Changing this can be a little messy so be prepared to have about 1/8 of a gallon of gas drip out when you disconnect the fuel line.

Tools Needed:

Parts/Supplies Needed:

1) Remove the gas cap to relieve pressue in the tank.

2) Remove the splash guard.

3) Loosen the 2 nuts that hold the fuel filter bracket on.

4) Use 2 box wrenches to loosen the two connections on the filter as shown in the picture. You should have a bucket underneath the filter to catch the dripping fuel when you do this step.

5) I wrapped the fuel line with a rubber glove to slow down the fuel drip.

6) Install the new fuel filter (part #23300-50020), tighten the bracket, and finally install the splash guard.

7) Check for leaks over the next few days. Write down the mileage and date of your fuel filter change.

Lexls.com Notes: Thanks for contributing the tutorial Thuan! The original tutorial is located here on the Lexus Owners Club (LOC) website.

 

Support LexLS.com

If you found this information useful please support the site by clicking the button below and making a donation. Thank you.

 

 

: home :: info :: tutorials :: sponsors :: support :: links :: contact :: site map :
Site best viewed at 800x600 or higher using Mozilla Firefox Get Firefox!
This is an enthusiast site and is not affiliated with Lexus/Toyota USA in any way.
Lexus/Toyota logos are trademarks of their respective companies.
Copyright © 2003-2012 C. Pearson. All rights reserved.
Last revised: Sunday, 27-Nov-2011 16:04:38 CST