home | info | tutorials | sponsors | support | links | contact

How to Remove the Painted Pin Stripes
1990-1994 Lexus LS400

By Thuan, LOC Member 92Lex

Before doing anything read my disclaimer & safety info.

 

Notes

I tested this on the gas cap door first just to make sure it wouldn't damage my paint. It's a lot cheaper to get that small door painted versus having a whole panel painted. It didn't damage my finish at all....I didn't have to polish either.

Parts/Supplies Needed:

1) Use the masking tape and paper and mask off above and below the pin stripe. Work on 2-3 foot sections at a time.

2) Spray on the Easy-Off and let it soak in for about 1-3* minutes. *Warning: The time required will vary, test the gas cap stripes first for about a minute, then wipe off. If you need more reapply. This is strong stuff and damage to the paint is certainly possible.*

3) Take a rag and just wipe it off. You shouldn't even have to rub it off. It should just wipe right off with the foam from the Easy-Off. Then remove the tape and paper and use a wet rag to clean up the area. Water neutralizes the Easy-Off. Make sure you wear gloves. It's EASY.

Lexls.com Notes: Thanks for the tutorial Thuan! Thuan's original tutorial is located here on the Lexus Owners Club (LOC) forum.

 

 

Support LexLS.com

If you found this information useful please support the site by clicking the button below and making a donation. Thank you.

 

 

: home :: info :: tutorials :: sponsors :: support :: links :: contact :: site map :
Site best viewed at 800x600 or higher using Mozilla Firefox Get Firefox!
This is an enthusiast site and is not affiliated with Lexus/Toyota USA in any way.
Lexus/Toyota logos are trademarks of their respective companies.
Copyright © 2003-2012 C. Pearson. All rights reserved.
Last revised: Saturday, 03-Dec-2011 14:43:29 CST