home | info | tutorials | sponsors | support | links | contact

How to Check & Clean the EGR Vacuum Modulator Filter
1990-1994 Lexus LS400

By LexLS.com

Before doing anything read my disclaimer & safety info.

 

Notes

Checking this is about as hard as putting air in your tires.

Tools Needed:

1) Some of the components of the emission control system. Carefully remove the cap on the EGR vacuum modulator. You might have to use a thin flathead screwdriver to pry the cap off.

2) Here you can see a fairly dirty EGR vacuum modulator filter. I used small screwdriver to pull the filter out.

2) Blow the dust and dirt out of the filter holder. Use compressed air to clean the dust out of the filter. Replace the filter if needed with a equivalent type of material. Lexus does not sell the filter alone. The only way to get a new filter from Lexus is to buy an entire now vacuum modulator assembly.

3) Put the filter back in and pop the cover back on.

 

Support LexLS.com

If you found this information useful please support the site by clicking the button below and making a donation. Thank you.

 

 

: home :: info :: tutorials :: sponsors :: support :: links :: contact :: site map :
Site best viewed at 800x600 or higher using Mozilla Firefox Get Firefox!
This is an enthusiast site and is not affiliated with Lexus/Toyota USA in any way.
Lexus/Toyota logos are trademarks of their respective companies.
Copyright © 2003-2012 C. Pearson. All rights reserved.
Last revised: Sunday, 27-Nov-2011 09:57:22 CST