 |
The cabinets are made of 3/4" birch plywood on the sides. The top is 1/4" plywood covered with Formica. |
 |
Note that the controls had to be wired to a keyboard emulator outside of the controller box, so longer cables than normal were needed. The two joysticks and buttons were purchased at GameCabinets, Inc. |
 |
The controller boxes are attached to a base that was screwed into the inside of the main cabinet. Note that the cables from the two boxes are attached to an Ultimarc IPAC4. Had to go for the 4 in order to support four joysticks. |
 |
The boxes are connected to the base by two sticks on each side. The two sticks stay parallel to each other, which keeps the boxes roughly parallel to the ground at all points coming out of the cabinet. |
|
|
