AVR Setup Step-by-step how to install AVR dev tools
Introduction

Here is a 'generic' step-by-step to getting an AVR development platform going on your computer using the free AVR toolchain (avr-gcc, avr-libc and avrdude) Pretty much every project uses this toolset so its a good way to get going

Comments? Suggestions? Post to the forum!

Mac Setup - Paths

The following two methods both place all of the files in the /usr/local/bin directory in the hard driver. Unfortunately that directory is not in the default path. That means that when you type avrdude into the terminal it cant figure out where to look. In this prep-step you'll change the profile of your Terminal to add /usr/local/bin to the path.

Find the Terminal program, you'll be using this to do most of this stuff. Its in the Applications/Utilities folder

In the new Terminal window, type in echo $SHELL and press return

If the output is /bin/bash then type the following command:
echo 'PATH=$PATH:/usr/local/bin' >> ~/.bash_profile
all on one line. Press return.

If the output is /bin/csh or /bin/tcsh then type the following command:
echo 'set path = ($path /usr/local/bin)' >> ~/.cshrc
all on one line. Press return.

Close any Terminal windows and open up a new one. This makes sure the .bash_profile or .cshrc is reloaded. Now type in echo $PATH (for bash) or echo $path (for t/csh) you should get something like the following:

The important thing is that at the end of the line is /usr/local/bin

Option 1. AvrMacPack
A nice package from ObDev, I havent tried it but a friendly email'er said its great.
Option 2. OSX-AVR.
Step 1. Installing XCode

You will need make which is included in XCode, as OSX-AVR doesn't come with it (ugh)

Step 1. Download and install the mac developer tools (XCode).

You need to have make installed, but it doesn't come with the OSXAVR package. You can try installing it with fink, which will require a lot less space but the following is guaranteed. If you want to have the latest avr-gcc you may also have to do it the "old way" which guarantees the most recent tools will be installed.

To install XCode you will need the official packages. These are available on your Mac OS X Install CD, or from apple at: apple developer tools. The file is about 900MB so unless you have a fast connection I strongly encourage grabbing it off of the Install CDs that came with your Mac (you do still have those, right?) Basically we need the native Mac OS X compiler tools so that we can generate the AVR compiler tools.

 

Step 2. Install OSX-AVR

There's finally a good/fast way of installing all these tools under Mac OS X PPC or i386! First, download the OSX-AVR packge for PPC (older macs) or i386 (Intel macs, latest ones) from sourceforge.

Run the OSX-AVR.mpkg

You're done!

(Images of installation and process are forthcoming but its rather easy so go ahead and try it anyways)

Don't forget you have to install XCode as make doesn't come with this package.

Can't get it working? Dont worry, help is available in the forums!

Option 3. Old style, 'by hand' compilation

The following steps are essentially the same for MacOS X or Linux, BSD or any other unixy OS.

This is the 'old style' of installing avr-gcc, its longer and more tedious but you are guaranteed to have the latest version.

(Note that this doesn't seem to work on Intel Macs for unknown reasons, we're investigating...)

Leah Buchley has an excellent tutorial, and you should follow it. I've reduplicated it here in case the site goes down. (also with a few minor 'improvements' and images

Step 2. Download & install binutils (an essential utility for the C compiler)

Download the current release of binutils from : http://www.gnu.org/software/binutils/ (you can also go straight to the download site here) For these examples, we'll be using binutils-2.17.tar.gz but you should use whatever is most recent. Save it into your home directory, not the desktop.

Decompress the downloaded file and double click on it to decompress it (or use Stuffit Expander, in the Applications folder). You should now have a folder called binutils-2.17 which you should drag into your Home directory

Open up a Terminal window and navigate to the binutils directory. Type: cd binutils-2.17 <return> (or whatever you downloaded) theb type in ls to verify everythings there

Configure binutils for AVR. type: ./configure --target=avr <return>
this will start a long process that will spit out a lot of text.

Once its done, compile binutils. type: make <return>
this will start an even longer compilation process


Once that's done, install binutils. type: sudo make install
You will be prompted to enter your password. Only administrators can install software thats why the password is necessary.


Step 3. Download & install gcc (the C compiler)
First, download the current release of gcc from: http://gcc.gnu.org/mirrors.html currently thats gcc 4.2.0

Decompress the downloaded file and put the decompressed folder in your home directory. Open up a new Terminal window in your home directory, type cd gcc-4.2.0 and then ls to verify its all in there.

Next, c reate another directory to install gcc into.
type: cd .. <return> to go back into the home directory, then
type: mkdir avrgcc-4.2 <return> (substituting your gcc version for the 4.2)
Navigate to the folder you created.
type: cd avrgcc-4.2 <return>  (or whatever you named your folder)
Configure gcc for AVR.
Type: ../gcc-4.2.0/configure --target=avr --enable-languages=c --disable-libssp
   (substituting the name of the folder you decompressed for the gcc-4.2.0)
   **thanks to Seth Raphael for the --disable-libssp ti
p

Once the configuration is done, compile gcc.
type: make CC="cc --no-cpp-precomp" <return>

This will take a long time so go have a sandwich

When its done and you've washed your plate and silverware, install gcc. type: sudo make install <return>
and enter your password when prompted


Step 4. Download and install avr-libc (an essential C library for AVR chips)

Download the current release of avr-libc from : http://savannah.nongnu.org/projects/avr-libc/

Decompress the downloaded file and put the decompressed folder in your home directory

In a new Terminal window, navigagte to the avr-libc directory. from your home directory
type: cd avr-libc-1.4.6 <return>  (or whatever you downloaded)

Configure avr-libc. type: ./configure --host=avr <return>

Compile avr-libc. type: make

Install avr-libc. type: sudo make install

Step 5. Download and install avrdude (the software that loads programs from your machine onto the chips)

Download the current release of avrdude from : http://download.savannah.gnu.org/releases/avrdude/

Decompress the downloaded file and put the decompressed folder in your home directory

In a Terminal window, navigate to the avrdude directory. From your home directory type: cd avrdude-5.2  (or whatever you downloaded)
Configure avrdude. type: ./configure
Compile avrdude. type: make
Install avrdude. type: sudo make install

Yay all the software is installed!

Can't get it working? Dont worry, help is available in the forums!

August 24, 2009 15:13