Advance Projects - AdvanceCD makebootfat Documentation

Documentation of makebootfat

Makebootfat Bootable FAT Disk Creation

1 Synopsis

makebootfat [options] IMAGE

2 Description

This utility creates a bootable FAT filesystem and populates it with files and boot tools.

It is mainly designed to create bootable USB and Fixed disk for the AdvanceCD project.

The official site of AdvanceCD and makebootfat is:

http://advancemame.sourceforge.net/

3 Options

-o, --output DEVICE

Specify the output device. It must be the device where you want to setup the filesystem. You can use the special "usb" value to automatically select the USB Mass Storage device connected at the system. This option is always required.

-b, --boot FILE

-1, --boot-fat12 FILE

-2, --boot-fat16 FILE

-3, --boot-fat32 FILE

Specify the FAT boot sector images to use. The -b option uses the same sector for all the FAT types. The other options can be used to specify a different sector for different FAT types. The FAT types for which a boot sector is not specified are not used. This option is always required.

-m, --mbr FILE

Specify the MBR sector image to use. If this option is specified a partition table is created on the disk. Otherwise the disk is filled without a partition table like a floppy disk.

-F, --mbrfat

Change the MBR image specified with the -m option to pretend to be a FAT filesystem starting from the first sector of the disk. This allows booting from USB-FDD (Floppy Disk Drive) also using a partition table generally required by USB-HDD (Hard Disk Drive). The MBR image specified with the -m option must have executable code positioned like a FAT boot sector. You can use the included `mbrfat.bin' file.

-c, --copy FILE

Copy the specified file in the root directory of the disk. The file is copied using the readonly attribute.

-x, --exclude FILE

Exclude the specified files and subdirectories in the IMAGE directory to copy. The path must be specified using the same format used in the IMAGE directory specification.

-X, --syslinux2

Enforce the syslinux 2.xx FAT limitations. Syslinux 2.xx doesn't support FAT32 at all, and FAT16 with 64 and 128 sectors per cluster formats. This option excludes all the FAT formats not supported by syslinux. Please note that it limits the maximum size of filesystem to 1 GB.

-Y, --syslinux3

Enforce the syslinux 3.xx FAT support. Syslinux 3.00 supports all the FAT types and sizes but it requires a special customisation of the boot sector and of the file `ldlinux.sys'. This option does this customisation without the need to use the syslinux installer if the `ldlinux.sys' file is copied on disk with the -c option.

-Z, --zip

If possible force the ZIP-Disk compatibility. It sets a geometry of 32 sectors and 64 heads. It also uses the 4'th partition entry in the partition table. It's required to boot also in USB-ZIP mode.

-P, --partition

Ensure to operate on a partition and not on a disk.

-D, --disk

Ensure to operate on a disk and not on a partition.

-L, --label LABEL

Set the FAT label. The label is a string of 11 chars.

-O, --oem OEM

Set the FAT OEM name. The OEM name is a string of 11 chars.

-S, --serial SERIAL

Set the FAT serial number. The serial number is a 32 bit unsigned integer.

-E, --drive DRIVE

Set the BIOS drive to setup in the FAT boot sector. Generally this value is ignored by boot sectors, with the exception of the FAT12 and FAT16 FreeDOS boot sectors that require the correct value or the value 255 to force auto detection.

-v, --verbose

Print some information on the device and on the filesystem created.

-i, --interactive

Show the errors in a message box. Only for Windows.

-h, --help

Print a short help.

-V, --version

Print the version number.

IMAGE

Directory image to copy on the disk. All the files and subdirectories present in this directory are copied on the disk.

4 Disks and Partitions Names

In Linux disk devices are named /dev/hdX or /dev/sdX where X is a letter. Partition devices are named /dev/hdXN or /dev/sdXN where X is a letter and N a digit.

In Windows disk devices are named \\.\PhysicalDriveN where N is a digit. Partition devices are named \\.\X: where X is a letter, but sometimes \\.\X: is a disk and not a partition, for example on floppies and on all the USB Mass Storage devices without a partition table.

5 Syslinux

To make a bootable FAT using syslinux you must use the -X option for syslinux version 2.xx or the -Y option for syslinux version 3.xx. You must also copy in the root directory of the disk the files:

	ldlinux.sys	The syslinux loader.
	syslinux.cfg	The syslinux configuration file.
	linux	The Linux kernel image (the file name may be different).
	initrd.img	The initrd filesystem (the file name may be different or missing).

You must also specify the `ldlinux.bss' boot sector with the -b option and possibily the `mbr.bin' MBR sector with the -m option. Both the sector images are present in the syslinux package.

For example:

makebootfat -o usb \ -Y \ -b ldlinux.bss -m mbr.bin \ -c ldlinux.sys -c syslinux.cfg \ -c linux -c initrd.img \ image

6 Loadlin and FreeDOS

To make a bootable FAT using loadlin and FreeDOS you must copy in the root directory of the disk the files:

	kernel.sys	The FreeDOS kernel. Remember to use the "32" kernel version to support FAT32.
	command.com	The FreeDOS shell.
	autoexec.bat	Used to start loadlin.
	loadlin.exe	The loadlin executable.
	linux	The Linux kernel image (the file name may be different).
	initrd.img	The initrd filesystem (the file name may be different or missing).

You must also specify the FreeDOS boot sectors available on the FreeDOS `sys' source package with the -1, -2, -3 option. For the MBR you can use the sectors image available on the FreeDOS `fdisk' source package.

For example:

makebootfat -o /dev/hda1 \ -E 255 \ -1 fat12com.bin -2 fat16com.bin -3 fat32lba.bin \ -c kernel.sys -c command.com \ -c autoexec.bat -c loadlin.exe \ -c linux -c initrd.img \ image

7 Multi Standard USB Booting

The BIOS USB boot support is generally differentiated in three categories: USB-HDD, USB-FDD and USB-ZIP.

The USB-HDD (Hard Disk Drive) standard is the preferred choice and it requires the presence of a partition table in the first sector of the disk. You can create this type of disk using the -m option.

The USB-FDD (Floppy Disk Drive) standard requires the presence of a filesystem starting from the first sector of the disk without a partition table. You can create this type of disk without using the -m option.

The USB-ZIP (ZIP Drive) standard requires the presence of a device with a very specific geometry. Specifically, it requires a geometry with 32 sectors and 64 heads. It also requires the presence of a partition table with only a bootable partition in the fourth entry. You can create this type of disk using the -m and -Z option.

Generally these standards are incompatible, but using the -m, -F and -Z options you can create a disk compatible with all of them.

To use the -F option, the MBR image specified must follow the constrains:

It must start with a standard FAT 3 bytes jump instruction.
It must have the bytes from address 3 to 89 (included) unused.

And example of such image is in the `mbrfat.bin' file.

For example to create a syslinux image:

makebootfat -o usb \ -Y \ -Z \ -b ldlinux.bss -m mbrfat.bin -F \ -c ldlinux.sys -c syslinux.cfg \ -c linux -c initrd.img \ image

and for a FreeDOS and loadlin image:

makebootfat -o usb \ -E 255 \ -Z \ -1 fat12com.bin -2 fat16com.bin -3 fat32chs.bin \ -m mbrfat.bin -F \ -c kernel.sys -c command.com \ -c autoexec.bat -c loadlin.exe \ -c linux -c initrd.img \ image

Please note that FreeDos has some problems booting from USB. It works only on very few conditions.

8 Exclusion

To exclude some files or directories in the image copy, you can use the -x option using the same path specification which are you using for the image directory.

For example, if you need to exclude the `isolinux' and `syslinux' subdirectories from the `image' directory you can use the command:

makebootfat ... \ -x image/isolinux \ -x image/syslinux \ image

9 Copyright

10 See Also

syslinux(1), mkdosfs(1), dosfsck(1)